A gaming chair or any kind of chair comes with a certain time of warranty from the manufacturer. But sometimes the manufacturers don’t cover some issues like the chair not going up or you don’t have enough time to claim the warranty.

So, how to fix gaming chair not going up? Well, there are many useful ways to make your chair work perfectly fine and you will not have to leave your favorite working spot just because the chair is not supported anymore.

How to Fix Gaming Chair Not Going Up

Just stick to the article and you will know how to make your chair go and stay up.

How to fix gaming chair not going up?

Gaming chairs start malfunctioning sometimes because there’s always a chance of human or calculations error in the construction of these chairs.

So sometimes when you don’t use the chair properly or overdo something beyond its limits, the chair starts to malfunction as in this topic that the chair won’t go up. This may happen to your chair because of the gas loss that may have occurred in your chair cylinder.

If you know that something’s wrong with your chair and you still keep using it, it can be very unhealthy for you and that small negligence can lead to major problems in the future.

Can we fix gaming chair that won’t go up?

Although it requires somewhat expertise in mechanics and problem-solving skills, don’t worry you can do that. So, yes we can fix a sinking gaming chair.

Professionals might do it a different way but you can use these simple and easy-to-follow steps of this guide that do not require so much expertise.

Note: Some extremely rare cases are always there and they can be entirely different than the circumstances considered in this article.

So don’t panic or think that this guide is a waste of time if these methods don’t work because you might need a professional’s help in that case.

How to fix gaming chair not going up?

Below is given a very simple method to fix your gaming chair if it won’t go up. Giving it a try will for sure help in a way.

  • Use a hose clamp

Using a hose clamp is always the best one because it works every time and never gets old. Almost anyone who has been faced with this issue loves this method because it doesn’t take your time and is very cheap.

In fact, you won’t even have to spend a single penny if you keep the leftover mechanical parts in your home sanitary projects. It must be in those things somewhere we’re pretty sure.

So to use a hose clamp, you just need to follow these simple steps ahead after making the seat cylinder visible to you. You may have to lift the seat’s plastic covering to do that.

  • Adjust your seat height according to how you like it

This step is a little bit tricky yet vet important because you need to know what your suitable seat height is. Once you know that, you can adjust your seat height accordingly. But how will you do that if the seat doesn’t stay in its position when you sit on it?

Some extreme cases have also been reported when the seat doesn’t stay up even when no one is sitting on it. Well, in this case, you can tilt the seat a little sideways and complete the procedure.

Otherwise, if you can’t do it the right way, a general rule of thumb is that you should keep your seat height at knee level. This is because your knees should be bent but in a straight position when you sit on the chair.

Another important instruction while adjusting the seat height is that you should know the exact height you want your seat to be. This is because your seat height can’t be adjusted after that.

  • Wrap the hose clamp around the cylinder after it’s exposed

Now that you have adjusted the chair’s seat height, you have to wrap the hose clamp around the cylinder. A hose clamp is very easy to find and very cheap; you can find it in any hardware store.

Unscrew the hose clamp to loosen the metallic belt of the clamp and then wrap it around the cylinder. Then tighten the screw enough so that the clamp can hold your chair seat up. But another bit of a protip is that you can actually wrap a rubber tape or something like that before wrapping the clamp.

It’s because we need to give the clamp something that it can hold on to because a metal cylinder is usually very slippery and the metallic clamp cannot stay up if there’s much load on the chair.

  • Tighten the hose clamp around the duct/rubber tape on the cylinder

This is not the final step but nothing less than that. So you have to double-check everything before completing this step like checking the duct tape, especially the seat height.

Once you’ve checked everything by yourself, you should tighten the hose clamp around the duct/rubber tape. But make sure that your seat height is accurate as well as it helps your chair to at least rotate freely if not be the adjustable height.

You just have to put the belt in its rectangular hole and tighten the screw of the hose clamp. It will tighten the belt automatically and the seat will be fixed in its place.

  • Test if the chair stays there or not

After completing all the steps given above, you need to test your chair’s comfortability and whether it stays there or not. Mind you that your hose clamp is what the seat height would be, so make sure to put it at the exact height you want your chair to be.

This is because the hose clamp will go inside the chair’s plastic cover and you won’t be able to see it. But still, sometimes the height is not properly set yet. If this is the case with you, don’t worry just move the hose clamp up or down and adjust it accordingly.

Sometimes the hose clamp may be from a third-class company so it can also move on its own when you sit on the chair. And if that happens, tighten the clamp or wrap a rubber strip around the clamp so it doesn’t move.


How to fix gaming chair not going up? Fixing a gaming chair is very easy. You just have to follow the steps given above. If we had to shortly tell you all about it, then it will be like this;

1) Make the seat cylinder visible to you

2) Adjust your seat height according to your preference

3) Wrap rubber tape on the cylinder

4) Wrap a hose clamp on the rubber tape wrapper on the cylinder

5) Tighten the screw of the hose clamp and test the chair seat for yourself.

We hope that you liked this article. If you did, please make sure to share it with others, and do not forget to visit this website regularly. Also, if you have any questions or suggestions, please tell us in the comment section below. We will be very happy to hear from you.